50W 1-Channel X-Band Module for Microwave and Defense

Product Description

X-Band Transmit/Receive (TRM) Module 1-Channel 50W 8500~9500MHz Peak Power for Industrial Microwave Systems & Defense Radar

Product Description

Description

TRM stands for Tx /Rx Module, The module consists of 01 TX/RX Channel, TRM controller, Health

Monitoring and Power supply card. The TRM will hav Tx input port , Tx output/RX input ports , Rx output ports and LO input port .

Specification

Typical performance at +28V DC +25oC, and in a 50Ω system.
 

RF / ELECTRICAL
PARAMETER	MIN	TYP.	MAX	UNIT
Operating  Frequency	8500		9500	MHz
No . of Tx / Rx Channel		1
Peak Output Power / Channel		47		dBm
Transmit Gain @ In all frequency/temps.		45		dB
Tx input Power		2	6	dBm
Second Harmonic of TX		< -25		dBc
Period		1200		us
Pulse Width	0.5		300	us
Max Duty Cycle			25	%
Pulse Droop	<0 .5 (For 300 us pulse width)			dB
Fall Time		150		ns
Raise Time		150		ns
Phase Shifter Settling Time	<150			ns
Transmit Channel Output ON/OFF Ratio	>110			dBc
Power Added Efficiency	25 %
Phase Shifter	6 bits			0 ~ 360 °
Phase Shifter Accuracy	< 5 °(RMS)
VSWR (TX IN, ANT IN, RX OUT Ports)		1.8:1
Rx Gain		50		dB
Rx Output P1dB		≥10		dBm
RX Input P1dB		-15		dBm
Rx Noise Figure(0 dB Attenuation State)			4	dB
Rx Noise Figure(15 dB Attenuation State)			6	dB
Receiver Channel Image Rejection	>25			dBc
Receiver Output in Band Spurious Rejection	>60 (Measured for +8 dBm output power)			dBc
Receiver Output Out of Band Spurious/Harmonics Rejection	>50 (Measured for +8 dBm output power)			dBc
Attenuator	6 bits			0~31.5 dB
Attenuator Accuracy	< 1.7  (RMS)			dB
Maximum Phase Change of Receiver Channel vs Attenuator States	<15 °

 

LO Input Power Level	0				4	dBm
LO In to Transmit Out Isolation	<70					dB
LO In to Receive Out Isolation	≥70					dB
Transmit Input to Receiver Output Isolation	>50					dBc
Max . Rx tolerable power		≥50W				Max duty cycle
Power Supply		28 \+5\-5				V
Average currents				2		A
Peaking currents				8		A

 

MECHANICAL
PARAMETER	VALUE	UNIT
Dimensions (L x W x  H)	120 x 100 x 11	mm
RF  Connectors (Input / Output)	BMA/SMA-K  ×3	--
DC /Control Connector	J30J - 21ZK	--
Weight	≤500	g

 

ENVIRONMENTAL / PROTECTIONS
PARAMETER	MIN	MAX	UNIT
Operating Temp. (Housing Temp.)	-33	+70	°C
Humidity Range	0-100		%
PA  Baseplate Shutoff Temperature	+ 80		°C

 

Connector Definition
AMPLIFIER CONNECTOR TYPE:	J30J - 21ZK
TRIAD CABLE PART NUMBER:	--
NUMBER	DESCRIPTION
1, 12,2, 13	+28V
3, 14,4, 15	GND
5	SEL
16	R
6	Load
17	T
7	Data
18	CLK
8,9, 19	GND
10	Monitor voltage of Temperature
21	-5V
11,20	+5V

 

OUTLINE DRAWING

 

Company Profile

Nanjing Shinewave Technology Co., Ltd. is a company specializing in the research and development, production and sales of RF microwave antennas, active and passive components and subsystems. The company's product field covers a variety of microwave  communication devices, including anti-jamming antennas, RF power amplifiers, T/R modules, VCO/DROs, microwave filters, duplexers, frequency sources, and related subsystems, which are widely used in mobile communications, radar, and other fields.

In order to meet the special needs and higher requirements of customers, in addition to standard products, we provide customized product development methods. We always provide the customers with fast and high-quality products and services.

Showroom

Participation in exhibitions

 

 

Why choose us

Staffing
Over ten years' OEM/ODM experience.
R&D team with doctor,master degree talents.
Products covers a wide range of applications.

TECHNICAL SUPPORT
Fast Response
Provide Project Technical AdviceTo Provide Customers With Quality Pre-Sales/Post-Sales Service

PRODUCT SUPPLY
Full Spectrum Products Available
Customer Needs As A Guide
To Provide Customers With Customized Products And Solutions

PRODUCT QUALITY
All Have Passed Various Performance Tests Before DeliveryTo Ensure That The Product is Good And Stable During Use

 

Certifications

 

FAQ

1. Our Advantages
Relying on the academic research team of famous universities, the company has established an innovative research and development team with doctoral and master's degree talents, and continues to absorb excellent talents in the industry and outstanding students from famous universities to strengthen the team.The company has about twenty authorised invention patents in microwave devices, circuits and antennas. The application field involves radar, electronic countermeasures, aerospace and aviation.

2. About Customised
We can customise according to customer's requirements, just tell us the frequency, gain, power.

3. About Delivery Time
Customised products are normally 4-6 weeks, if in stock 1-2 weeks can be shipped.

4. How quality is guaranteed
1)Quality Control: Strictly testing raw materials and the production process to meet standards.
2)Performance Testing: Conducting functionality and environmental tests to verify power output and other key metrics. 
3)Warranty and Support: Providing a warranty period and technical support to address issues during use. 
4)Factory Audits: Regularly conducting internal and third-party quality audits.

5. Delivery Method
If you have your own freight forwarder, we can send to your designated freight forwarder, if not, we can choose the most convenient way of delivery, such as DHL, Fedex, air freight, sea freight.

6. Payment Method
L/C,D/A ,D/P,T/T,Western union, Moneygram, Paypal, Alipay, Bank.