Usage: | Telephone, Computer, Workstation, Server |
---|---|
Type: | Wired |
Support Network: | GSM |
Information content: | Data |
Certification: | CE, ISO, RoHS |
Condition: | New |
Customization: |
---|
Suppliers with verified business licenses
The C Band 4500-5000MHz 100W RF Power Amplifier is a specialized device designed to amplify radio frequency (RF) signals within the C Band frequency range, specifically from 4500 megahertz (MHz) to 5000MHz. Here's a detailed introduction to this RF power amplifier:
Frequency Range: This power amplifier operates within the C Band frequency range, covering frequencies from 4500MHz to 5000MHz. The C Band is commonly used in satellite communications, radar systems, and other high-frequency RF applications.
Power Output: The amplifier provides a power output of 100 watts, making it suitable for applications requiring high-power RF signals within the C Band.
Applications: The C Band 4500-5000MHz 100W RF Power Amplifier finds applications in satellite ground stations, radar systems, microwave links, point-to-point communications, and other C Band RF applications where high-power amplification is essential.
Performance: This amplifier is designed to deliver high-performance amplification while maintaining signal integrity and reliability. It ensures that amplified signals retain their quality and accuracy within the C Band frequency range.
Stability and Reliability: RF power amplifiers in the C Band are typically designed for stability and reliability, ensuring consistent performance in demanding environments.
Versatility: Despite its specific frequency range and power output, this amplifier can be integrated into diverse RF systems and setups that require high-power amplification within the C Band.
In summary, the C Band 4500-5000MHz 100W RF Power Amplifier is tailored for amplifying RF signals within the C Band frequency range. Its high-power output and performance characteristics make it suitable for various C Band RF applications, including satellite communications and radar systems.
Specification
Typical performance at +28V DC +25oC, and in a 50Ω system.
RF / ELECTRICAL | ||||
PARAMETER | MIN | TYP. | MAX | UNIT |
Operating Frequency | 4.5 | 5 | GHz | |
Input Power for Nominal Output | -15 | dBm | ||
RF Input Maximum (peak) | -5 | dBm | ||
Gain | 59 | dB | ||
Output Power CW( peak RF input conditions at 4.75GHz) | 50 | dBm | ||
Small Signal Gain Flatness | 3 | dB | ||
P1dB | 44 | dBm | ||
P3dB | 48 | dBm | ||
PAPR | 6 | dB | ||
ACPR(Harmonic Suppression) | -30 | dbc | ||
Input Return Loss | 1.5:1 | 2.0:1 | ||
Output Return Loss | 1.5:1 | 2.0:1 | ||
Noise Figure(+25ºC) | 7 | db | ||
PAE | 30 | % | ||
Impedance | 50 | Ohm | ||
Voltage | 28 | V |
MECHANICAL | ||
PARAMETER | VALUE | UNIT |
Dimensions (L x W x H) | 180 x 90 x 22 | mm |
RF Connectors (Input / Output) | SMA- KFD/ SMA- KFD | -- |
DC Connector | DB15 | -- |
Cooling | Consider heat dissipation with the system (Not Supplied) | |
Mounting | φ3.5-4 Thru Hole | -- |
Weight | ≤2 | kg |
ENVIRONMENTAL / PROTECTIONS | |||
PARAMETER | MIN | MAX | UNIT |
Operating Temp. (Housing Temp.) | -40 | +60 | °C |
Humidity Range | 0-100 | % | |
PA Baseplate Shutoff Temperature | + 90 | °C | |
TTL-level Enable | Enable Input should be drivable from GPIO of external controller | ||
Forward Power | Status in DB15 connector | ||
Reflected Power | Status in DB15 connector | ||
Input Current | Status in DB15 connector | ||
Device Temperature | Status in DB15 connector |
INPUT/OUTPUT PINS | |||
AMPLIFIER CONNECTOR TYPE: | DB15 | ||
TRIAD CABLE PART NUMBER: | -- | ||
PIN NUMBER | LABEL | DESCRIPTION | |
1 | VDD | +28Vdc IN | |
2 | VDD | +28Vdc IN | |
3 | VDD | +28Vdc IN | |
4 | VDD | +28Vdc IN | |
5 | GND | GROUND | |
6 | GND | GROUND | |
7 | GND | GROUND | |
8 | GND | GROUND | |
9 | DGND | DGND | |
10 | NC | NC | |
11 | On/Off | Amplifier Enable:TTL"HIGH (Logic 1) Amplifier Disable:TTL"LOW"(Logic 0) |
|
12 | Forward Power | POWER DETECTOR (0-3.3V) | |
13 | Reflected Power | Reflected DETECTOR(0-3.3V) | |
14 | Input Current | Analog voltage relative to IDD@5A/V: IDD=0.14+5A*△V | |
15 | Device Temperature | Analog voltage relative to module temperature @10mv/ºC:V=0.5+10mv*△ºC |
Wireless Communication Systems: RF power amplifiers are used to enhance the power of wireless signals in various communication systems, including mobile communication base stations, wireless LAN (Wi-Fi), cellular networks, and cellular phones. They improve signal transmission distance and coverage, ensuring communication quality.
FAQ
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
Please feel free to contact us with your inquiry, we will find the frequency you need and offer help to your problems.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Shipment Date
Sample | 20 business days |
≤50 pcs | 60 business days |
>50 pcs | 90 business days |
>200 pcs | Negotiate |
Q5: Delivery Date of the sample by DHL/FedEx
USA/Canada/Europe/Asia | 3-5 days |
Middle East/Latin American | 5-7 days |
African | 3-7 days |
Suppliers with verified business licenses