S Band 2-4GHz 17dBm Saturated Power Output SMA-F Connectors Wide Band Limiting Amplifier for electronic ware
The S-band (2-4GHz) 17dBm low-power amplifier is a type of amplifier designed for the S-band frequency range (2-4GHz) with low power requirements. This amplifier is commonly used in wireless communication systems, radar receivers, wireless sensors, and other applications that require moderate to low power amplification.
Frequency Range: Suitable for the S-band (2-4GHz) frequency range, covering many common wireless communication and radar application bands.
Output Power: Typically provides an output power of 17dBm, suitable for low-power applications such as receiver front-ends and sensor systems.
Gain: Offers moderate gain to boost signal strength without introducing excessive signal distortion or noise.
Low Power Consumption: Designed as a low-power amplifier to save energy and reduce heat generation.
Application Areas: Widely used in receiver front-ends of wireless communication systems, radar receivers, wireless sensor networks, and other applications with moderate to low power amplification requirements.
Design Features: May utilize single transistors or integrated circuit designs, combined with matching networks and power control circuits to achieve optimal performance and power consumption balance.
Stability and Reliability: Offers good stability and reliability, suitable for applications requiring long-term stable operation.
The module is designed for both military and commercial applications. The latest device technologies and design methods are employed to offer high power density, efficiency, and linearity in a small, lightweight package.
ELECTRICAL SPECIFICATIONS@25˚C
Parameter |
Min |
Typical |
Max |
Units |
Frequency Range |
2 |
|
4 |
GHz |
Input power Range |
-25 |
|
+10 |
dBm |
Noise Figure |
|
|
5.0 |
dB |
Saturated Power output |
17 |
|
22 |
dBm |
output Power Flatness |
|
|
±1.8 |
dB |
harmonic output |
|
-10 |
|
dBc |
VSWR Input/output |
|
|
2:1 |
Ratio |
Pulse response Overshoot |
|
|
0.5 |
dB |
Pulse response Recovery time |
|
50 |
|
ns |
Pulse response Settling time |
|
50 |
|
ns |
Pulse response Rise time |
|
20 |
|
ns |
DC Power Supply |
|
12 |
|
Volt |
Current |
|
300 |
|
mA |
ENVIRONMENTAL RATINGS
Parameter |
Min |
Typical |
Max |
Units |
Max Input power |
|
|
+20 |
dBm |
Operating Temperature |
-55 |
|
+85 |
ºC |
Non-operating Temperature |
-55 |
|
125 |
ºC |
Relative humidity (non-condensing) |
|
95 |
|
% |
Altitude (M1L-STD-810F) |
10000 |
|
30000 |
feet |
Shock / Vibration (M1L-STD-810F) |
|
Airbone |
|
|
MECHANICAL SPECIFICATIONS
Parameter |
Value |
Limits |
Units |
Dimensions |
100*25*18 |
Max |
Millimeter |
Weight |
100 |
Max |
gram |
RF Connectors Input |
SMA-F |
|
|
RF Connectors output |
SMA-F |
|
|
Impedance |
50 |
|
ohms |
Outline Dimensional Drawing
Nanjing Shinewave Technology Co., Ltd. is a company specializing in the research and development, production and sales of RF microwave antennas, active and passive components and subsystems. The company's product field covers a variety of microwave communication devices, including anti-jamming antennas, RF power amplifiers, T/R modules, VCO/DROs, microwave filters, duplexers, frequency sources, and related subsystems, which are widely used in mobile communications, radar, and other fields.
In order to meet the special needs and higher requirements of customers, in addition to standard products, we provide customized product development methods. We always provide the customers with fast and high-quality products and services.
Participation in exhibitions
Staffing
Over ten years' OEM/ODM experience.
R&D team with doctor,master degree talents.
Products covers a wide range of applications.
TECHNICAL SUPPORT
Fast Response
Provide Project Technical AdviceTo Provide Customers With Quality Pre-Sales/Post-Sales Service
PRODUCT SUPPLY
Full Spectrum Products Available
Customer Needs As A Guide
To Provide Customers With Customized Products And Solutions
PRODUCT QUALITY
All Have Passed Various Performance Tests Before DeliveryTo Ensure That The Product is Good And Stable During Use
FAQ
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
Please feel free to contact us with your inquiry, we will find the frequency you need and offer help to your problems.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Shipment Date
Sample |
20 business days |
≤50 pcs |
60 business days |
>50 pcs |
90 business days |
>200 pcs |
Negotiate |
Q5: Delivery Date of the sample by DHL/FedEx
USA/Canada/Europe/Asia |
3-5 days |
Middle East/Latin American |
5-7 days |
African |
3-7 days |