50MHz~6GHz Frequency Synthesizer Local Oscillators

• Customization: Available
• Usage: Telephone, Workstation, Server, Mobile phone
• Type: Wireless
• Model NO.: SWT-TFS10-06
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Model Number: Swt-TFS10-06
• Frequency Range: 50MHz~6GHz
• Input Frequency: 100MHz
• Frequency Stability: Sync with External Reference
• Frequency Accuracy: Synchronization with External Reference, Synchroni
• Phase Noise: -153dbc/Hz@1kHz
• Transport Package: Standard Packing
• Specification: 20*16*4mm
• Trademark: OEM
• Origin: Nanjing, China
• Production Capacity: 300000pices/Year

Product Description

50MHz~6GHz Frequency synthesizer  Local Oscillators

Description
Output frequency 50MHz~6GHz;
Small size: 20*16*4mm
Frequency step :10MHz
Control mode: SPI control

Product introduction
The TFS10-06 patch frequency source has a frequency output range of 50MHz to 6GHz with a minimum frequency step of 10MHz. The TFS10-06 uses a digital phase-locked loop (PLL) design to enable smaller frequency steps. It has the advantages of high frequency resolution, wide output frequency range, stable operation, convenient frequency hopping control, etc. At the same time, it adopts patch package, small size, light weight, easy integration, and is suitable for microwave components, wireless receivers, digital acquisition systems and other microwave products.


Specification

ARGUMENT
EXTERNAL REFERENCE
Input frequency	100MHz
Input power	5±3dBm
Frequency stability	Sync with external reference
Frequency accuracy	Synchronization with external reference, synchronization accuracy 47Hz
Phase noise	-153dBc/Hz@1kHz
Input impedance	50 Ω
Frequency output
Output frequency	≥20
Frequency stepping	≤+12/300
Frequency hopping time 1	When locked, TTL high is output
Stray 2	-40~+70
Harmonic 3	-45~+80
Output power	40×40×12.8

  Note:
1.Frequency hopping time: Frequency hopping time is defined as the time interval between TFS10-06 receiving the command to the frequency stabilization and the target frequency error less than 1MHz;
2. Stray: When the frequency step is less than 10MHz, the frequency can be output, and the stray is -60dBc;
3. Harmonics: When the higher harmonics of the output frequency are still relatively large, it is recommended that the user must be filtered.
 

TFS10-06 Phase noise
Frequency off set	1GHz	2GHz	4GHz	6GHz
100Hz	≤ -97	≤ -91	≤ -85	≤ -82
1kHz	≤ -106	≤ -98	≤ -94	≤ -92
10kHz	≤ -108	≤ -102	≤ -98	≤ -98
100kHz	≤ -114	≤ -106	≤ -100	≤ -98
1MHz	≤ -142	≤ -134	≤ -128	≤ -124

                                 2.5GHz phase noise test curve
                                             6GHz phase noise test curve

POWER SUPPLY REQUIREMENT
Operating voltage	VCC1: 3.3V±0.1/10mA VCC2: 5.0±0.2V/260mA
Start-up time	2s
Frequency output
Operating temperature	-40˚ to +70˚ C
Storage temperature	-55˚ to +85˚ C
External volume
Volume	20×16×4mm
Weight	≤ 5g

 
Outline Dimensional Drawing

 


Pin definition

pin	Pin name	Pin definition	pin	Pin name	Pin definition
6,7,8,9,13,14,15,16	GND	Ground	4	LE	The SPI communication was enabled
5	RFOUT	Radio frequency output	3	DATA	SPI communication data entry
11	REF IN	Reference input	2	SCK	SPI communication clock
12	VCC1	Digital power supply 3.3V/10mA	1	LD	Lock indication,TTLhigh lock
10	VCC2	Analog power supply 5.0V/260mA

Warning: TFS10-06 is assembled with solder paste with a melting point of 230ºC, so manual welding or reflow welding is used when assembling TFS10-06, and the temperature cannot exceed 220ºC.
Note: After power-on, it is necessary to delay 1S before sending the control command to the frequency synthesizer to ensure that the PLL chip of the frequency synthesizer module and the single chip microcomputer are initialized.

Product order number
TFS10-06P-xxxx	Frequency is the output of fixed frequency, XXXX is the output frequency, the unit is MHz
TFS10-06-xxxx	Frequency output range: 50 MHZ to 6000MHz. XXXX is the default initial frequency

Nanjing Shinewave Technology Co., Ltd. is a company specializing in the research and development, production and sales of RF microwave antennas, active and passive components and subsystems. The company's product field covers a variety of microwave  communication devices, including anti-jamming antennas, RF power amplifiers, T/R modules, VCO/DROs, microwave filters, duplexers, frequency sources, and related subsystems, which are widely used in mobile communications, radar, and other fields.

In order to meet the special needs and higher requirements of customers, in addition to standard products, we provide customized product development methods. We always provide the customers with fast and high-quality products and services.

 

Q&A:
 

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?
 

Please feel free to contact us with your inquiry, we will find the frequency you need and offer help to your problems. 

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample	20 business days
≤50 pcs	60  business days
>50 pcs	90 business  days
>200 pcs	Negotiate

Q5: Delivery Date of the sample by DHL/FedEx

USA/Canada/Europe/Asia	3-5 days
Middle East/Latin American	5-7 days
African	3-7 days