200MHz~15GHz Frequency Synthesizer Local Oscillators Ffrequency Sources/Synthesizers

• Customization: Available
• Usage: Telephone, Workstation, Server, Mobile phone
• Type: Wireless
• Model NO.: SWT-TFS10-15
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Model Number: Swt-TFS10-15
• Frequency Range: 200MHz~15GHz
• Input Frequency: 100MHz
• Frequency Stability: Sync with External Reference
• Frequency Stepping: 10MHz
• Phase Noise: -153dbc/Hz@1kHz
• Transport Package: Standard Packing
• Specification: 20*16*4mm
• Trademark: OEM
• Origin: Nanjing, China
• Production Capacity: 300000pices/Year

Product Description

200MHz~15GHz Frequency synthesizer Local Oscillators

Description
Output frequency 200MHz~15GHz;
Small size: 20*16*4mm
Frequency step :10MHz
Control mode :SPI

Product introduction
The TFS10-15 patch frequency source has a frequency output range of 200MHz to 15GHz with a minimum frequency step of 10MHz, and the TFS10-15 uses a digital phase-locked loop design to achieve smaller frequency steps. It has the advantages of high frequency resolution, wide output frequency range, stable operation and convenient frequency hopping control. At the same time, the chip package is small in size, light in weight and easy to integrate. It is suitable for microwave components, wireless receivers, digital acquisition systems and other microwave products.

Specification

ARGUMENT
EXTERNAL REFERENCE
Input frequency	100MHz
Input power	3±5dBm (0.2~14GHz) -5±5dBm (14~15GHz)
Frequency stability	Sync with external reference
Frequency accuracy	Synchronization with external reference, synchronization accuracy of 0.02Hz
Phase noise	-153dBc/Hz@1kHz
Input impedance	50 Ω
Frequency output
Output frequency	200~15000MHz
Frequency stepping	10MHz
Frequency hopping time 1	200uS
Stray 2	(200MHz~14GHz)≤-65(dBc) (14GHz~15GHz)≤-60(dBc) ≤ -7dBc
Harmonic 3	(200MHz~14GHz) 3±5
Output power	(14GHz~15GHz) -5±5

  Note:
1.Frequency hopping time: frequency hopping time is defined as the time interval between TFS10-15 receiving the command and the frequency stabilizing to the error less than 1MHz with the target frequency;
2. Stray: When the frequency step is less than 10MHz, the correct frequency output can still be obtained, and the stray performance is tested to deteriorate, spury-50dbc.
3.Harmonics: when the higher harmonics of the output frequency are relatively large, it is recommended that the user carry out the necessary filtering processing.

TFS10-15 Phase noise
Frequency off set	1GHz	5GHz	10GHz	15GHz
100Hz	≤ -100	≤ -88	≤ -82	≤ -79
1kHz	≤ -113	≤ -99	≤ -93	≤ -91
10kHz	≤ -120	≤ -105	≤ -99	≤ -96
100kHz	≤ -120	≤ -105	≤ -100	≤ -96
1MHz	≤ -138	≤ -124	≤ -118	≤ -114

 

                                                                        5GHz phase noise test curve
                                                              10GHz phase noise test curve

POWER SUPPLY REQUIREMENT
Operating voltage	VCC1: 3.3±0.1V/30mA VCC2: 3.3±0.2V/400mA
Start-up time	2s
Frequency output
Operating temperature	-40˚ to +70˚ C
Storage temperature	-55˚ to +85˚ C
External volume
Volume	20×16×4mm
Weight	≤ 5g

 
Outline Dimensional Drawing

 



Pin definition

pin	Pin name	Pin definition	pin	Pin name	Pin definition
6,7,8,9,13,14,15,16	GND	Ground	4	LE	The SPI communication was enabled
5	RFOUT	Radio frequency output	3	DATA	SPI communication data entry
11	REF IN	Reference input	2	SCK	SPI communication clock
12	VCC1	Digital power supply 3.3V/30mA	1	LD	Lock indication,TTLhigh lock
10	VCC2	Analog power supply 3.3V/400mA

Warning:
TFS10-15 is assembled by welding paste with a melting point of 230 ° C, so manual welding or reflow welding is used when assembling TFS10-15, and the temperature cannot exceed 220 ° C.
Attention:
1: After power-on, it is necessary to delay for 1S before sending the control command to the frequency synthesizer to ensure that the PLL chip of the frequency synthesizer module and the single chip microcomputer are initialized.
2: Use suggestion: high frequency output part of the peripheral circuit plus high pass filter is better.

Product order number
TFS10-15P-xxxx	Frequency is the output of fixed frequency, XXXX is the output frequency, the unit is MHz
TFS10-15-xxxx	Frequency Output range: 200 to 15000MHz. XXXX is the default initial frequency

Nanjing Shinewave Technology Co., Ltd. is a company specialized in the research and development, production and sales of RF microwave passive components and subsystems. The company's product field covers a variety of microwave communication devices, including microwave filters, duplexers, amplifiers, frequency sources, and related subsystems, which are widely used in mobile communications and other fields.

In terms of microwave filters, the company has comprehensive products and strong design capabilities. The main products include cavity band-stop filter, waveguide filter, electrically tunable filter, multi-frequency combiner, multi-frequency combining platform POI, dielectric cavity dual-mode filter, LC filter, miniaturized comb filter, interdigital filter, etc.

In order to meet the special needs and higher index requirements of customers, in addition to standard products, we provide customized product development methods, and wholeheartedly provide customers with fast and high-quality products and services.

 

Q&A:
 

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?
 

Please feel free to contact us with your inquiry, we will find the frequency you need and offer help to your problems. 

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample	20 business days
≤50 pcs	60  business days
>50 pcs	90 business  days
>200 pcs	Negotiate

Q5: Delivery Date of the sample by DHL/FedEx

USA/Canada/Europe/Asia	3-5 days
Middle East/Latin American	5-7 days
African	3-7 days